Autodesk Fusion Operations defines a product as a series of operations through which a raw material goes.
After creating the product’s reference in the system, it is necessary to set the operations which transform the raw material into that finished good and associate both the operations and the product.
Learn how to create them one by one with the following steps, or check the article on how to Import more than one at once, here:
Create an Operation
1. From the products (1) menu, choose the product to which you want to add a new operation by pressing the "code" or the "Edit" button (2).
2. In the Product page, under the "Operations and production flow" tab, click " +Add Operation".
4. In the Operation form, the only mandatory field that's not automatically filled is the operation code, which is the unique operation identifier.
The other mandatory fields that are automatically filled are:
Task Duration: the average time that the operation usually takes to complete - in theory
Task Duration Customer: time that was set in the budget
Quantity ratio: Quantity of product produced in a specified period of time
Number of times per product: Execution of this operation per unit of product, i.e., the number of times an operation has to be performed to produce a unit of product.
There are other fields and options, but they are not mandatory, and for now, you can leave them blank.
5. After completing the step from 1 to 4 remember to “Save Operation”.
Need help? Request a Fusion Operations expert to contact you here.